|
|
Repair product for soft brick, hard brick, kiln posts and more. Good from Cone 06 up to Cone 10. Fire to cure.
Product Details
We think this is the best kiln patching compound you'll find. Bricks are stronger where they are patched together rather than where they are still whole. Use the patch to glue firebrick back together. Fire to Cone 06 to cure. Note: A quick dip (or spray) of the soft brick in water helps to allow Axner Patch to flow and coat better.
You may also use it as a filler for chipped bricks. You may let it thicken to a putty consistency for larger fill areas; or mix the Patch with ceramic fiber to make a good filler.
Note: Axner Patch will be damaged if frozen. Therefore, we suggest caution if ordering for shipment to cold regions during the Winter seasons.
Instructions for Use: Axner Patch is a ceramic bonding and coating agent for use with many refractory materials. It has been used successfully from Cone 06 up to Cone 10; and could possibly be fired higher. Fire Patch to cure.
It works very well as a coating agent for material that is subject to abrading or crumbling from normal workshop practice.
It may be thinned slightly with water if needed and applied by brushing, dipping or spraying.
It may be used to bond broken soft bricks back together along with hard brick, broken kiln posts, Kaowool and Fiber Frax, Hard facing and Rigidizer. Hard face the soft brick of your electric kiln and eliminate the headache of crumbling from bumping and scraping.
|
|